Signature Series 8 Channel Marine Amplifier

SG-DA82000

SG-DA82000 $799.99USD

Manuals & Downloads

Owners Manuals

Warranty & Compliance

  • Warranty Information (5.62 MB PDF) Download

We didn't find any results for the search

FAQs

My Fusion system has a loud hum or noise coming from the speakers connected to my amplifier.

This is normally caused by introduced interference through the RCA cables connected from the stereo to the amplifier and is often referred to as a ground loop. It can be caused by numerous electric sources of interference such as refrigerators, power and ground cables, LED lights etc. You can spend a lot of time searching for the source, so prevention is the best course - do not run RCA cables near any electrical equipment or power/ground cable runs.

The quickest way to resolve this is by fitting ground loop isolators on all RCA cables - this is an inexpensive way to remove the unwanted noise.

Videos

Articles

New Support Request

Sending...

Success

Thank you for your enquiry. A Fusion team member will contact you.

Back to Form
How will this be used?

We use your name to help verify your registered products when you call customer support, or to communicate with you about your transactions or products. You do not need to provide your full name, but you may if you wish.

Please fill out your email

How will this be used?

We require an email address to contact you in response to your enquiry. We use it to help verify your request when you contact Fusion Entertainment, or to communicate with you about your request, transactions or products. With your consent, we may use it to send you news and special offers.

Please fill out your phone number

How will this be used?

We require your phone number to contact you in response to your enquiry and to help verify your products for customer support.

Please select a region

How will this be used?

We require the region you live in to efficiently identify which support team you will be referred to if further support is required. If you have opted in to email marketing, we will use this information to provide you with emails relevant to your region.

Please enter a serial number

How will this be used?

We require the serial number to identify exactly which product you have purchased to efficiently and effectively assist with your product query.

Please enter the software version

How will this be used?

We require the software version to identify which version your product is operating on to efficiently and effectively assist with your product query.

Please enter date of purchase

How will this be used?

We require the date of purchase to verify whether or not your product is under warranty.

Add Address Details

Your address is only required if you are submitting an RMA and need the product sent back to you.

Please select a country

Your address is only required if you are submitting an RMA and need the product sent back to you.

Please fill out a message

How will this be used?

We require a description of your question or issue to help you with your product enquiry.

Please fill out the verification

View our privacy policy

Register Product

Personal Details

How will this be used?

We use your name to help verify your registered products when you call customer support, or to communicate with you about your transactions or products. You do not need to provide your full name, but you may if you wish.

Please fill out your email

How will this be used?

We require an email address to contact you in response to your enquiry. We use it to help verify your request when you contact Fusion Entertainment, or to communicate with you about your request, transactions or products. With your consent, we may use it to send you news and special offers.

Please select a region

How will this be used?

We require the region you live in to efficiently identify which support team you will be referred to if further support is required. If you have opted in to email marketing, we will use this information to provide you with emails relevant to your region.

Product Details

Please fill out the serial number

How will this be used?

We require the serial number to identify exactly which product you have purchased to efficiently and effectively assist with your product query.

How will this be used?

We require a description of any additional details or questions you have to help you with your product further.

Please fill out the verification

View our privacy policy

Sending...

Success

Thank you, your products have been registered. You will receive a confirmation email shortly.

Back to Form

Our most stunning, efficient and powerful amplifiers for the ultimate audio experience.

Introducing an impressive new addition to Fusion’s Signature Series amplifier range: the SG-DA82000.

Fusion Signature Series amplifiers are purpose-built for the outdoor environment. Boasting some of the most impressive environmental protection available, they deliver a Signature performance on the road like never before.

Our most efficient, stunning and powerful amplifier, the SG-DA82000 also features an Outdoor-Ready design that will resist corrosion. Its incredible 2000 Watt peak power will power up to 8 pairs of speakers at 2 Ohms (2 x 4 Ohm speakers per channel in parallel) or up to 4 pairs of speakers at 2 Ohms (2 x 4 Ohm speakers per channel in parallel) and 2 subwoofers. RCA line-level inputs allow for easy connection to new or existing systems.

The SG-DA82000 is Fusion's first 8 channel, Class-D Hi-Fi amplifier. The key benefit of a Class-D amplifier is that it has a low battery drain with high output, making this the perfect amplifier for the outdoor environment. The SG-DA82000 also has conformal coated PCBs for maximum product life and performance, plus the amplifier chassis is a heat sink, to reduce component core temperature and increase efficiency.

Undeniably a stand-out piece, the stunning stainless steel mirror control panel cover conceals and protects all cable connections and setting controls, with an attractive finish to complement any installation.

This product is rated Outdoor-Ready and carries a 3-year limited consumer warranty.

Features:

Class-D Amplifier Technology - The highly efficient Class-D design provides 2000-Watts peak power whilst drawing less current than a standard Class-AB amplifier. This design provides increased efficiency and power output to your speakers, letting you enjoy your music for longer.

2000 Watts Peak Power – With a peak power of 2000 watts, you can easily power up to 8 pairs of speakers or up to 4 pairs of speakers with 2 subwoofers.

Outdoor-Ready Design with Conformal Coated PCBs - Extending the life of your amplifiers, the Signature Series are designed specifically for use on the road, with conformal coated PCBs to provide extra protection from the elements.

Rigid Aluminum Alloy Heat Sink - Molded to form a singular die-cast chassis, the fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation.

Stainless Mirror Finish - The polished stainless-steel control panel cover conceals and protects all cable connections and settings controls whilst providing an attractive finish to complement any installation.

Speaker Configuration - Whether you require 2 Ohms per channel or 4 Ohms bridged, your Signature Series amplifier has your installation options covered to achieve the optimum output levels.

Connect up to two speakers per channel at 2 Ohms, or for extra power, bridge two channels at 4 Ohms to connect two subwoofers.

Zone Designation - To align with the Fusion entertainment system zone philosophy, the input and output connections are labelled as zones.

Outdoor-Ready Design - Signature Series amplifiers are perfect for the outdoor environment, and carry a 3-year warranty.

Class-D Amplifier Technology

Our most efficient, stunning and powerful amplifier series features Class-D Technology. The highly efficient 2000 Watt amplifier design ensures lower battery drain with a higher output in comparison with Class-AB amplifiers. This delivers increased power to the connected speakers and/or subwoofers, extending your audio entertainment experience to a whole new level.

The Outdoor-Ready Standard

As an Outdoor-Ready product, the Signature Series amplifiers are designed and engineered for harsh outdoor environments. Once a product has been subject to rigorous environmental testing and passed our stringent Outdoor-Ready approval process, it is awarded the accreditation and recognized with an industry-leading 3 year consumer warranty.

Rigid Aluminum Alloy Heat Sink

Providing increased efficiency without compromising the form factor, the Signature Series amplifier range features a rigid aluminum alloy heat sink. Greater heat dissipation and unquestionable efficiency is achieved with molded fins forming a singular die-cast chassis, with the layout precisely calculated to increase the surface area of the heat sink.

Are you ready to experience the Power of Music?

WHERE TO BUY

Related Products

Product Specifications

Frequency Response 10 Hz to 40 kHz (-3 dB @ 4 Ohm rated power)
Peak Power Output 2000 W
Rated Power Output (4 Ohm) 100 W rms x 8 @ 14.4 V input < 1% THD+N (EIA/CEA-490A)
Rated Power Output (2 Ohm) 140 W rms x 8 @ 14.4 V input < 1% THD+N (EIA/CEA-490A)
Rated Power Output (4 Ohm Bridged) 280 W rms x 4 @ 14.4 V input < 1% THD+N (EIA/CEA-490A)
Input Sensitivity 0.3 V to 8 V rms, user adjustable
Input Impedance 7k Ohm nominal
High-Pass/Low-Pass Full Range Filter Yes, user selectable
Filter Cross-Over Frequency 32 Hz to 320 Hz, user adjustable
Filter Cross-Over Slope 12 db/octave
Bass-Boost 0 to 9 dB, user adjustable (zone 2/4 only)
Operating Voltage 10.8 V to 16 V dc
Remote Switch-On Yes - 6 V threshold
Current Consumption (Standby) < 1 mA @ 14.4 V input
Current Consumption (Idle) < 2.5 A @ 14.4 V input
Current Consumption (Max) 100 A @ 14.4 V input
Fuse Rating 4 x 40 A ATC Blade-Type (SAE J1171 Compliant)
Protection Circuits Reverse-Voltage, Input Under/Over Voltage, Over-Temperature, Output Short-Circuit
Operating Temperature Range 0 to 50°C (32 to 122°F)
Ingress Protection Rating Dry area installation only
Dimensions 420 mm (L) x 210 mm (W) x 57 mm (H) or 16-9/16" (L) x 8-1/4" (W) x 2-1/4" (H)
Weight 5.20 kg with cover or 11.5 lb with cover
Warranty 3 years