7.7" 280 Watt Coaxial Sports Chrome Marine Speaker with LEDs
Manuals & Downloads
- Installation Guide - English (523.086 kB PDF) Download
- Installation Guide - German (527.342 kB PDF) Download
- Installation Guide - Spanish (522.111 kB PDF) Download
- Installation Guide - French (525.22 kB PDF) Download
- Installation Guide - Italian (517.405 kB PDF) Download
- Installation Guide - Dutch (524.452 kB PDF) Download
- Installation Guide - Portuguese (522.267 kB PDF) Download
- Mounting Template (153.34 kB PDF) Download
Warranty & Compliance
- Safety & Product Info/Warranty (176.327 kB PDF) Download
Search Help Topics
We didn't find any results for the search
My Fusion system has a loud hum or noise coming from the speakers connected to my amplifier.
This is normally caused by introduced interference through the RCA cables connected from the stereo to the amplifier and is often referred to as a ground loop. It can be caused by numerous electric sources of interference such as refrigerators, power and ground cables, LED lights etc. You can spend a lot of time searching for the source, so prevention is the best course - do not run RCA cables near any electrical equipment or power/ground cable runs.
The quickest way to resolve this is by fitting ground loop isolators on all RCA cables - this is an inexpensive way to remove the unwanted noise.
How do I connect wiring to my Signature Series Sport speaker for LED lighting?
Sports Model LED Wiring
Connecting the LED wires to the Sports model speakers (Note: This feature is available only on the Sports model speakers - you can control the color of the LEDs by the polarity of the LED wires)
- Using the hex key, loosen the screws on the wiring terminals on the back of the speaker.
- Connect the black and red wires to the terminal according to the preferred LED color.
- Blue: black wire to negative (-) and red wire to positive (+)
- White: black wire to positive (+) and red wire to negative (-)
- Using the hex key, tighten the screws on the wiring terminals.
- Push the wire into a retaining clip to relieve the tension on the wire.
Connecting the Sports model speakers' LED wires to power (Note: This feature is available only on the Sports model speakers)
All 12VDC wiring to the LEDs must be fused at the power source end of your cable using a 3A fuse. The red power (+) wire should be connected to a 12VDC source through an isolator switch or circuit breaker to turn the speaker LEDs on and off. You can use the same isolator or circuit breaker controlling the power supply to your stereo, which allows you to turn the LEDs and stereo on and off at the same time. If it is necessary to extend the red and black wires include with the speakers, you should use 20 AWG (0.5 mm2) or thicker wire.
- Route the red power (+) and black ground (-) wires to the battery and speaker.
- Connect the black wire to the negative (-) battery terminal.
- Connect the red wire to the positive (+) terminal through a 3A fuse and isolator switch or circuit breaker.
Are the Signature Series Classic grilles available as a spare part?
Yes, the Classic White grilles are setup as a spare part therefore your local Fusion dealer will be able to order this in for you.
To find your local dealer visit our Where To Buy section.
Are the Signature Sports grilles removable?
Unfortunately, due to the fact the LED lighting and tweeter are mounted within the grille, they cannot be removed.
Thank you, your products have been registered. You will receive a confirmation email shortly.Back to Form
We could not register your products due to an error. Please resolve the issues below or contact us directly.
Error Details Explanation Text
Exceptional design and acoustic engineering has created a speaker range with a stunning signature sound.
Pushing the boundaries of what is possible on the open road, FUSION’s Signature Series speakers are designed to provide unparalleled performance even when exposed to the harshest environment.
Combining ‘CURV’ Cone composite technology with a Silk Dome tweeter and fully sealed crossover components, the Sports Industrial Chrome Signature 7.7” Speaker system is a stylish solution for premium on-road listening.
The Sports style Signature Series speakers feature dual-color diffused LED lighting options that illuminate Striking Blue or Sparkling White, to either set the mood or start the party.
These 7.7" Signature Series speakers can handle up to a thunderous 280-Watt peak power.
UPDATE: Now with an updated grille and enhanced acoustics to take your audio experience with Signature Series speakers to the next level.
CURV Cone Technology - Incorporates CURV woven fiber composite which is heat pressed to form a lighter and stronger cone that delivers greater sound definition and higher output, while also providing increased protection from the great outdoors.
Fully Sealed Crossover Components – Provides full protection from the harsh outdoor environment, whilst delivering an improved frequency response at the crossover point for a detailed audio spectrum and new level of acoustic performance.
Sports Styled Grille – A structurally ridged Outdoor-Ready™ design provides the ultimate cone protection, with great looks to complement any campervan. Engineered for both internal or external installation.
Silk Dome Tweeter - Creates a smooth upper frequency response and increased efficiency, producing crisp sound for unrivalled enjoyment.
Large Diameter Voice Coil – Delivering an increase in real power and efficiency, the voice coil provides a signature sound exclusive to the 7.7” FUSION Speakers.
Dual-Color Diffused LED Lighting Option* - Select either a Striking Blue or Sparkling White LED illumination for your speaker cone to add instant appeal that will energize your adventure.
*Color is determined by wiring polarity at installation.
The Power Of Music
Designed by musicians and engineered by outdoor enthusiasts, the Signature Series is a fusion of these two fundamentals. The result is the formation of a truly immersive musical experience. By incorporating the finest materials with Outdoor-Ready™ engineering practices, we have shaped a series so acoustically stunning and at the same time so robust, that it feels right at home on the road.
CURV Cone Technology
CURV Cone Technology is an innovative engineering process that has created a superior-performance composite cone that delivers premium audio reproduction. CURV is a tough and abrasion-resistant material that is 30% lighter than mica-filled polypropylene at equal stiffness, matched with superior durability and high resistance to moisture, UV and temperatures. CURV is the only option for the FUSION Signature Series marine speakers.
A Harmony Of High Quality Engineering
Silk Dome Tweeter
The silk dome tweeter provides a smooth upper frequency response to the sound stage of the Signature Series speakers. Matched with the increased efficiency of the high grade materials used in the speaker design, the silk dome tweeter plays a critical role in delivering a true symphony to the ears.
CURV Cone Technology
CURV Cone Technology is an innovative engineering process that has created a superior-performance polypropylene composite cone that delivers premium audio reproduction. CURV is a tough and abrasion-resistant material that is 30% lighter than mica-filled polypropylene at equal stiffness, matched with superior durability and high resistance to moisture, UV and temperatures, it is the only option for the Signature Series speakers.
Fully Sealed Crossover Components
All crossover components are sealed, resulting in enhanced protection from the harsh outdoor and marine environment. The crossover design delivers improved frequency response at the crossover point for a detailed spectrum of audio and a new level of acoustic performance.
Large Diameter Voice Coil
Delivering an increase in power and efficiency, the round wound copper voice coil provides a signature sound exclusive to the Signature Series speakers.
High Grade Basket Construction
The attention to detail highlights the built-for-purpose philosophy of the Signature Series marine speakers. With incorporated strain relief clips for wiring, gold-plated terminals and screw tight wire fasteners, the basket housing is truly thought out to ensure high quality delivery of audio. Understanding the environment the Signature Series will live in, high grade engineered plastics are utilized to provide optimal protection from the marine environment.
Dual-Color Diffused LED Lighting Options
The Signature Series Sports Speakers feature dual-color diffused LED lighting options that illuminate Striking Blue or Sparkling White to set the mood or start the party. Note: Color is determined by wiring polarity at installation.
The Outdoor-Ready Standard
As an Outdoor-Ready product, the Signature Series is designed and engineered for the harsh outdoor environment. Once a product has been subject to rigorous environmental testing and passed our stringent Outdoor-Ready approval process, it is awarded the accreditation and recognized with an industry-leading 3 year consumer warranty.
IP65 Water Resistance Rating
Every Signature Series speaker undergoes extensive environmental testing for ingress protection, ensuring they are prepared for the outdoor environment. The Signature Series has achieved an industry standard rating of IP65 - this indicates the product's protection against dust and water ingress. You can be confident that your Signature Series speakers are designed to withstand the harsh outdoor environment season after season.
Are you ready to experience the power of music?WHERE TO BUY
6.5" 230 WATT Coaxial Sports Chrome Marine Speaker with LEDs
8.8" 330 WATT Coaxial Sports Chrome Marine Speaker with LEDs
10" 450 Watt Sports Chrome Marine Subwoofer with LEDs
Marine Entertainment System with DVD/CD Player
Marine Entertainment System with Internal UNI-Dock
Signature Voltage Regulator
|RMS Power Rating (Watts)||100|
|Peak Power (Watts)||280|
|Frequency Response||60Hz - 22kHz|
|Tweeter Type||Silk Dome|
|Voice Coil Diameter||1.5"|
|LED Color Options||White and blue|
|Mounting Diameter Clearance||156mm (6-1/8")|
|Mounting Depth Clearance||85.5mm (3-3/8")|