Go to the settings menu and select 'set device name'. Enter the name and press 'play' to save. This is very useful when you have multiple stereos on the network, as well as for Bluetooth pairing.
Go to the settings menu and select “stereo”, then select the stereo from the list of Fusion stereos on the network.
The NRX200i Remote is rated LEN:3
Press the power on/off button (short press). Press again to unmute.
The remote software is embedded in the Fusion head unit software. In the settings menu select 'update' and then select 'NRX200'. The remote (or remotes) that are connected and powered on will be updated and the progress will be displayed on both the head unit and remote. Do not remove power during this operation as it can cause the remote to become non operational.
Whilst in NMEA mode simply press the source button to cycle supported available devices on the network.
Simply press and hold the source button until the NMEA screen is displayed . To return to the Audio mode simply press the menu button.
To resolve this issue, delete the Fusion-Link app from your device and then reinstall it.
Sorry, only Apple devices have the capability to navigate media libraries over Bluetooth.
Over-the-air software updates are only available for the Apollo Series. All other Fusion stereos require a USB stick loaded with an update folder connected to the stereo to perform an update. "Error" will display if there is no USB device connected, the USB device is not formatted correctly, or if the file is not in a folder named "update".