SG-FL652SPC / 010-02432-11
Manuals & Downloads
- Installation Instructions - English (673.574 KB PDF) Download
- Installation Instructions - Danish (595.025 KB PDF) Download
- Installation Instructions - German (598.227 KB PDF) Download
- Installation Instructions - Greek (612.268 KB PDF) Download
- Installation Instructions - Spanish (592.59 KB PDF) Download
- Installation Instructions - Finnish (590.597 KB PDF) Download
- Installation Instructions - French (595.709 KB PDF) Download
- Installation Instructions - Hungarian (594.83 KB PDF) Download
- Installation Instructions - Italian (590.062 KB PDF) Download
- Installation Instructions - Japanese (762.052 KB PDF) Download
- Installation Instructions - Korean (667.016 KB PDF) Download
- Installation Instructions - Norwegian (593.357 KB PDF) Download
- Installation Instructions - Dutch (596.781 KB PDF) Download
- Installation Instructions - Polish (601.391 KB PDF) Download
- Installation Instructions - Portuguese (593.789 KB PDF) Download
- Installation Instructions - Slovenian (594.979 KB PDF) Download
- Installation Instructions - Swedish (592.187 KB PDF) Download
- Installation Instructions - Thai (662.964 KB PDF) Download
- Installation Instructions - Chinese (Simplified) (836.622 KB PDF) Download
- Installation Instructions - Chinese (Traditional) (944.7 KB PDF) Download
- Mounting Template (160.117 KB PDF) Download
Search Help Topics
We didn't find any results for the search
My Fusion system has a loud hum or noise coming from the speakers connected to my amplifier.
This is normally caused by introduced interference through the RCA cables connected from the stereo to the amplifier and is often referred to as a ground loop. It can be caused by numerous electric sources of interference such as refrigerators, power and ground cables, LED lights etc. You can spend a lot of time searching for the source, so prevention is the best course - do not run RCA cables near any electrical equipment or power/ground cable runs.
The quickest way to resolve this is by fitting ground loop isolators on all RCA cables - this is an inexpensive way to remove the unwanted noise.
How do I connect wiring to my Signature Series Sport speaker for LED lighting?
Sports Model LED Wiring
Connecting the LED wires to the Sports model speakers (Note: This feature is available only on the Sports model speakers - you can control the color of the LEDs by the polarity of the LED wires)
- Using the hex key, loosen the screws on the wiring terminals on the back of the speaker.
- Connect the black and red wires to the terminal according to the preferred LED color.
- Blue: black wire to negative (-) and red wire to positive (+)
- White: black wire to positive (+) and red wire to negative (-)
- Using the hex key, tighten the screws on the wiring terminals.
- Push the wire into a retaining clip to relieve the tension on the wire.
Connecting the Sports model speakers' LED wires to power (Note: This feature is available only on the Sports model speakers)
All 12VDC wiring to the LEDs must be fused at the power source end of your cable using a 3A fuse. The red power (+) wire should be connected to a 12VDC source through an isolator switch or circuit breaker to turn the speaker LEDs on and off. You can use the same isolator or circuit breaker controlling the power supply to your stereo, which allows you to turn the LEDs and stereo on and off at the same time. If it is necessary to extend the red and black wires include with the speakers, you should use 20 AWG (0.5 mm2) or thicker wire.
- Route the red power (+) and black ground (-) wires to the battery and speaker.
- Connect the black wire to the negative (-) battery terminal.
- Connect the red wire to the positive (+) terminal through a 3A fuse and isolator switch or circuit breaker.
Are the Signature Series Classic grilles available as a spare part?
Yes, the Classic White grilles are setup as a spare part therefore your local Fusion dealer will be able to order this in for you.
To find your local dealer visit our Where To Buy section.
Are the Signature Sports grilles removable?
Unfortunately, due to the fact the LED lighting and tweeter are mounted within the grille, they cannot be removed.
Thank you, your products have been registered. You will receive a confirmation email shortly.Back to Form
We could not register your products due to an error. Please resolve the issues below or contact us directly.
Error Details Explanation Text
Stunning signature acoustic performance now with premium CRGBW LED lighting.
Pushing the boundaries of what is possible on the water even further, the new revamped Fusion Signature Series 3 marine speakers deliver unparalleled performance even when exposed to the harshest marine conditions.
Incorporating the finest materials and latest acoustic technologies, we have combined ‘CURV’ cone composite technology with a silk dome tweeter and fully sealed crossover components to create a speaker system with a stunning signature sound for premium on-water listening.
The sports-style Signature Series 3 speakers feature industry-first CRGBW LED lighting to illuminate your vessel with an unprecedented spectrum of colors, to help set the mood or start the party with premium, more ambient lighting.
These 6.5" Signature Series 3 speakers can handle up to a thunderous 230 Watt peak power, so you can truly experience "The Power Of Music".
Premium CRGBW LED Lighting: Industry-first marine speakers with CRGBW (Cool White, Red, Green, Blue, Warm White) illuminates an unprecedented spectrum of colors from premium pastels to vibrant hues to match your music for an unparalleled, more ambient on-water entertainment experience. Control the color, brightness, light mode and speed with the optional MS-CRGBWRC wireless remote control (sold separately).
CURV Cone Technology: Incorporates CURV woven fiber composite which is heat pressed to form a lighter and stronger cone that delivers improved sound definition and higher output, while also providing increased protection from the marine conditions.
Fully Sealed Crossover Components: Provides full protection from the harsh marine environment, whilst delivering an improved frequency response at the crossover point for a detailed audio spectrum and new level of acoustic performance.
Sports Styled Grille: A structurally rigid True-Marine™ design provides the ultimate cone protection, with great looks to complement any vessel. Aesthetically designed for both in your cabin or on your deck.
Silk Dome Tweeter: Creates a smooth upper frequency response with increased efficiency, and delivers crystal clear music reproduction.
Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the Signature Series 3 speakers are designed and built to the highest industry standards for quality and robustness.
The Power Of Music
Designed by musicians and engineered by boaties, the Signature Series 3 is a fusion of these two fundamentals. The result is the formation of a truly immersive musical experience. By incorporating the finest materials with True-Marine™ engineering practices, we have shaped a series of marine speakers so acoustically stunning and at the same time so robust, that it feels right at home on the water.
Industry-first Cool and Warm White LED illumination
The Signature Series 3 sports-style speakers are the world's first marine speakers to incorporate both Cool White and Warm White LEDs in addition to standard RGB LEDs. Whereas other marine speakers have standard RGB LED lighting only, the additional Cool White and Warm White LEDs enables Fusion's Signature Series 3 speakers to create a wider range of color blends that is 3 times the industry standard - this is the Fusion difference.
CRGBW LED lighting - an unprecedented spectrum of colors
By incorporating both Cool White and Warm White in addition to standard RGB LEDs, an unprecedented spectrum of colors can now illuminate you vessel with premium pastels to vibrant hues to match the music for an unparalleled, more ambient on-water entertainment experience. Control of the color, brightness, light mode and speed is made easy with the MS-CRGBWRC wireless remote control (sold separately).
CURV Cone Technology
CURV Cone Technology is an innovative engineering process that has created a superior-performance composite cone that delivers premium audio reproduction. CURV is a tough and abrasion-resistant material that is 30% lighter than mica-filled polypropylene at equal stiffness, matched with superior durability and high resistance to moisture, UV and temperatures. CURV is the only option for the Fusion Signature Series 3 speakers.
The Finest Materials And Acoustic Engineering
Silk Dome Tweeter
The silk dome tweeter provides a smooth upper frequency response to the sound stage of the Signature Series speakers. Matched with the increased efficiency of the high grade materials used in the speaker design, the silk dome tweeter plays a critical role in delivering a true symphony to the ears.
CURV Cone Technology
CURV Cone Technology is an innovative engineering process that has created a superior-performance polypropylene composite cone that delivers premium audio reproduction. CURV is a tough and abrasion-resistant material that is 30% lighter than mica-filled polypropylene at equal stiffness, matched with superior durability and high resistance to moisture, UV and temperatures, it is the only option for the Signature Series speakers.
Fully Sealed Crossover Components
All crossover components are sealed, resulting in enhanced protection from the harsh outdoor and marine environment. The crossover design delivers improved frequency response at the crossover point for a detailed spectrum of audio and a new level of acoustic performance.
Large Diameter Voice Coil
Delivering an increase in power and efficiency, the round wound copper voice coil provides a signature sound exclusive to the Signature Series speakers.
High Grade Basket Construction
The attention to detail highlights the built-for-purpose philosophy of the Signature Series marine speakers. With incorporated strain relief clips for wiring, gold-plated terminals and screw tight wire fasteners, the basket housing is truly thought out to ensure high quality delivery of audio. Understanding the environment the Signature Series will live in, high grade engineered plastics are utilized to provide optimal protection from the marine environment.
The True-Marine Standard
As a True-Marine product, the Signature Series 3 marine speakers are designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3 year consumer warranty.
IP65 Water Resistance Rating
Every Signature Series 3 marine speaker undergoes extensive environmental testing for ingress protection, ensuring they are prepared for the marine environment. The Signature Series 3 has achieved an industry standard rating of IP65 - this indicates the product's protection against dust and water ingress. You can be confident that your Signature Series 3 marine speakers are designed to withstand the harsh marine environment season after season.
Designed To Comply With ISO12216
The Signature Series 3 speakers have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality.
Are you ready to experience the power of music?WHERE TO BUY
Are you ready for the new era of marine audio entertainment?
Request a Quote
Please select a product
No stores found.
Request a Quote
Get a quote from your nearest FUSION dealer
We've sent you a confirmation email.
You should hear back from these dealers shortly.
|Peak Power||230 Watts|
|RMS Power Rating||75 Watts|
|Efficiency (1W/1M)||90 dB|
|Frequency Response||70 Hz - 22 kHz|
|Nominal Impedance||4 Ohms|
|Recommended Amplifier Power (RMS)||30 - 90 W/Ch|
|Tweeter Type||Silk Dome|
|Voice Coil Diameter||1.2"|
|LED Color Options||CRGBW (Cool White, Red, Green, Blue, Warm White)|
|Water and Dust Resistance (IP Rating)||IP65|
|Mounting Diameter Clearance||136mm [5-3/8"]|
|Mounting Depth Clearance||79mm [3-1/8"]|
|Speaker Dimensions: Length x Height x Depth (Basket)||Ø 176mm x 76mm [Ø 6-15/16" x 3"]|