10" 450 WATT Classic Marine Subwoofer

SG-S10W

SG-S10W $299.99USD

Manuals & Downloads

Installation Instructions

  • Installation Guide - English (482.274 kB PDF) Download
  • Installation Guide - German (486.866 kB PDF) Download
  • Installation Guide - Spanish (483.086 kB PDF) Download
  • Installation Guide - French (486.489 kB PDF) Download
  • Installation Guide - Italian (479.627 kB PDF) Download
  • Installation Guide - Dutch (486.109 kB PDF) Download
  • Installation Guide - Portuguese (483.887 kB PDF) Download

Mounting Resources

  • Mounting Template (167.207 kB PDF) Download

Warranty & Compliance

  • Safety & Product Info/Warranty (176.327 kB PDF) Download

We didn't find any results for the search

FAQs

How do I connect wiring to my Signature Series Sport speaker for LED lighting?

Sports Model LED Wiring

Connecting the LED wires to the Sports model speakers (Note: This feature is available only on the Sports model speakers - you can control the color of the LEDs by the polarity of the LED wires)

  1. Using the hex key, loosen the screws on the wiring terminals on the back of the speaker.
  2. Connect the black and red wires to the terminal according to the preferred LED color.
    1. Blue: black wire to negative (-) and red wire to positive (+)
    2. White: black wire to positive (+) and red wire to negative (-)
  3. Using the hex key, tighten the screws on the wiring terminals.
  4. Push the wire into a retaining clip to relieve the tension on the wire.

Connecting the Sports model speakers' LED wires to power (Note: This feature is available only on the Sports model speakers)

All 12VDC wiring to the LEDs must be fused at the power source end of your cable using a 3A fuse. The red power (+) wire should be connected to a 12VDC source through an isolator switch or circuit breaker to turn the speaker LEDs on and off. You can use the same isolator or circuit breaker controlling the power supply to your stereo, which allows you to turn the LEDs and stereo on and off at the same time. If it is necessary to extend the red and black wires include with the speakers, you should use 20 AWG (0.5 mm2) or thicker wire.

  1. Route the red power (+) and black ground (-) wires to the battery and speaker.
  2. Connect the black wire to the negative (-) battery terminal.
  3. Connect the red wire to the positive (+) terminal through a 3A fuse and isolator switch or circuit breaker.

Are the Signature Sports grilles removable?

Unfortunately, due to the fact the LED lighting and tweeter are mounted within the grille, they cannot be removed.

Videos

Articles

New Support Request

Sending...

Success

Thank you for your enquiry. A Fusion team member will contact you.

Back to Form
How will this be used?

We use your name to help verify your registered products when you call customer support, or to communicate with you about your transactions or products. You do not need to provide your full name, but you may if you wish.

Please fill out your email

How will this be used?

We require an email address to contact you in response to your enquiry. We use it to help verify your request when you contact Fusion Entertainment, or to communicate with you about your request, transactions or products. With your consent, we may use it to send you news and special offers.

Please fill out your phone number

How will this be used?

We require your phone number to contact you in response to your enquiry and to help verify your products for customer support.

Please select a region

How will this be used?

We require the region you live in to efficiently identify which support team you will be referred to if further support is required. If you have opted in to email marketing, we will use this information to provide you with emails relevant to your region.

Please enter a serial number

How will this be used?

We require the serial number to identify exactly which product you have purchased to efficiently and effectively assist with your product query.

Please enter the software version

How will this be used?

We require the software version to identify which version your product is operating on to efficiently and effectively assist with your product query.

Please enter date of purchase

How will this be used?

We require the date of purchase to verify whether or not your product is under warranty.

Add Address Details

Your address is only required if you are submitting an RMA and need the product sent back to you.

Please select a country

Your address is only required if you are submitting an RMA and need the product sent back to you.

Please fill out a message

How will this be used?

We require a description of your question or issue to help you with your product enquiry.

Please fill out the verification

View our privacy policy

Register Product

Personal Details

How will this be used?

We use your name to help verify your registered products when you call customer support, or to communicate with you about your transactions or products. You do not need to provide your full name, but you may if you wish.

Please fill out your email

How will this be used?

We require an email address to contact you in response to your enquiry. We use it to help verify your request when you contact Fusion Entertainment, or to communicate with you about your request, transactions or products. With your consent, we may use it to send you news and special offers.

Please select a region

How will this be used?

We require the region you live in to efficiently identify which support team you will be referred to if further support is required. If you have opted in to email marketing, we will use this information to provide you with emails relevant to your region.

Product Details

Please fill out the serial number

How will this be used?

We require the serial number to identify exactly which product you have purchased to efficiently and effectively assist with your product query.

How will this be used?

We require a description of any additional details or questions you have to help you with your product further.

Please fill out the verification

View our privacy policy

Sending...

Success

Thank you, your products have been registered. You will receive a confirmation email shortly.

Back to Form

Enhance your on-water experience with premium low frequencies.

Defined low frequency bass can be the difference between a good audio system and a truly memorable entertainment experience. Introducing the Fusion Signature Series marine subwoofer, a carefully balanced blend of engineering brilliance and Fusion performance.

Comprising of a 10” high tensile fiberglass-paper composite cone driver, that produces a massive 450 Watts peak power, the Classic Signature Series subwoofer is finished with an elegant and discreetly styled perforated metal grille, creating low frequency vibes that are easy on the ears and the eyes.

Features:

450 Watts Peak Power – High power yet stunningly defined, the Signature Series subwoofer takes low frequency resonance to depths previously uncharted.

Fiberglass-Paper Composite Cone – Provides excellent self-damping, resolution and bass reproduction, for defined low frequency acoustics.

Perforated Metal Grille – This discreet, yet refined design is suitable for internal or external installation, with an elegant Classic White finish designed to perfectly blend with the aesthetics of your vessel.

Large Diameter Voice Coil - Providing an increase in real power and efficiency, the voice coil produces a signature sound and wave-rippling bass.

Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the Signature Series subwoofers are designed and built to the highest industry standards for quality and robustness.

The Power Of Music

Designed by musicians and engineered by boaties, the Signature Series marine speakers are the fusion of these two fundamentals. The result is the formation of a truly immersive musical experience. By incorporating the finest materials with True-Marine™ engineering practices, we have shaped a series of marine speakers so acoustically stunning and at the same time so robust, that it feels right at home on the water.

The True-Marine Standard

As a True-Marine product, the Signature Series is designed and engineered for the harsh marine environment. Once a product has been subject to rigorous environmental testing and passed our stringent True-Marine approval process, it is awarded the accreditation and recognized with an industry-leading 3 year consumer warranty.

IP65 Water Resistance Rating

Every Signature Series marine subwoofer undergoes extensive environmental testing for ingress protection, ensuring they are prepared for the marine environment. The Signature Series has achieved an industry standard rating of IP65 - this indicates the product's protection against dust and water ingress. You can be confident that your Signature Series marine subwoofers are designed to withstand the harsh marine environment season after season.

Designed To Comply With ISO12216

The Signature Series subwoofers have passed stringent pressure and watertightness tests in accordance to ISO12216 (D1.1 for Areas II, III and IV). This is critically important as it ensures the boat builders and consumers alike are installing genuinely safe speakers on board their vessel. By achieving ISO12216 compliance is a recognition of the product's superior design and build quality.

Are you ready to experience the power of music?

WHERE TO BUY

Related Products

Product Specifications

Product Code SG-S10W
Magnet Structure 68oz
RMS Power Rating (Watts) 250
Peak Power (Watts) 450
Efficiency (1W/1M) 88db
Frequency Response 30Hz - 2KHz
Impedance 4 Ohms
Voice Coil Diameter 2.0”

Mounting Dimensions

Mounting Diameter 219.98mm (8-11/16”)
Mounting Depth 130mm (5-1/8”)