Marine Entertainment System with Internal UNI-Dock

Update 1.21.41

Released on 18 Oct 2018

Download

Version:

Stereo 1.21.41

NRX Series Remote 1.02.75

DAB Module STM32 1.01

DAB Tuner 4.05

Bug Fixes:

General bug fixes and improvements

hdmi compatibility with new TV issue resolved

USB long track issue resolved

Updated remote version

Updated DAB version

Update 1.16.520

Released on 18 Oct 2017

Download

Version:
Stereo 1.16.520
NRX Series Remote 1.02.71
DAB Module STM32 C6D28C3
DAB Tuner 4.05

Bug Fixes:
General bug fixes and improvements
IR Remote play button issue resolved
Loading text issue resolved
BT pairing first device issue resolved
Updated DAB version

Important Notes

The accessory software updates (MS-NRX series/ MS-DAB100A) are embedded in the MS-AV755/MS-UD755 series update. Once the update has been installed in the stereo, the connected accessory MUST be updated from the 'update' menu screen in the 'settings' menu to be compatible with your Fusion Entertainment System. Please follow the installation instructions (above) or the update download on the product page.

**Please note this software does not work on the MS-AV750 or MS-UD750. If you require the software for either of these products, please manually search for it within the legacy section of our website.

What is the current consumption of my FUSION stereo?

Current consumption of Fusion marine stereos:

Fusion stereos have a standard voltage rating of 10.8V to 16V DC unless otherwise stated.

All figures are for individual head units only, not a system. Numbers can be added together to calculate the system current consumption.

Amplifiers will contribute significantly higher current consumptions.

All marine stereos with 4 amplified speaker outputs have been tested with 4 speakers attached and no USB devices connected.

All measurements are average, so measurements on other production stereos may vary. Values are subject to change without notification.

Last Updated 28 May 2019

How do I wire my speakers in 2 Ohm configuration for my compatible Fusion Stereo? (Parallel Configuration)

To wire two 4 Ohm speakers in parallel, to present a 2 Ohm load per channel to a Fusion Class-D 2 Ohm stable stereo, simply follow the below diagram showing the Positive terminals from each speaker connected to each other and the same with the Negative terminals. When this is done, connect the Positive and Negative wires from the closest speaker to the Stereo.

2-Ohm-parallel.jpg?mtime=20171020140758#asset:10865

Compatible Fusion Stereos:

Apollo RA770
Apollo RA670
755 / 750 / 700 Series
650 / 600 Series

Last Updated 9 Mar 2020

Why does the Fusion-Link app report "error" when I select "update" from the settings menu?

Over-the-air software updates are only available for the Apollo Series. All other Fusion stereos require a USB stick loaded with an update folder connected to the stereo to perform an update. "Error" will display if there is no USB device connected, the USB device is not formatted correctly, or if the file is not in a folder named "update".

Last Updated 28 May 2019

My Fusion-Link wireless application displays "No Stereos Available"

The first thing to check is that you are connected to the correct wireless network for the stereo. Once you have confirmed this, close the app on the device and restart it (consult the manufacturer's website for instructions on restarting). If this fails, check that you have a valid IP address on the stereo and follow the instructions in the tech support item: "My Fusion-link wireless remote Application will not connect to my 700 series stereo."

Last Updated 28 May 2019

My Fusion-Link wireless remote application will not connect to my 700 Series stereo.

The first thing to check is that the 700 Series is displaying a valid IP address on the 'about' screen. Select the 'settings' menu, then 'about' to confirm. If the display is "IPNone", the router is either not a compatible DHCP product or is not configured correctly. If the IP address starts with the prefix 169, it is not valid, as this is a default address when the router is not sending a DHCP generated IP address or is configured incorrectly. Please review the router's instruction manual or contact the manufacturer's website for technical help.

Last Updated 28 May 2019

New Support Request

Sending...

Success

Thank you for your enquiry. A Fusion team member will contact you.

Back to Form

Name

How will this be used?

We use your name to help verify your registered products when you call customer support, or to communicate with you about your transactions or products. You do not need to provide your full name, but you may if you wish.

Email *

Please fill out your email

How will this be used?

We require an email address to contact you in response to your enquiry. We use it to help verify your request when you contact Fusion Entertainment, or to communicate with you about your request, transactions or products. With your consent, we may use it to send you news and special offers.

Phone *

Please fill out your phone number

How will this be used?

We require your phone number to contact you in response to your enquiry and to help verify your products for customer support.

Region *

Please select a region

How will this be used?

We require the region you live in to efficiently identify which support team you will be referred to if further support is required. If you have opted in to email marketing, we will use this information to provide you with emails relevant to your region.

Product *

Please select a product

How will this be used?

We require the model of the product so we can efficiently and effectively assist you with your product query.

Serial Number *

Please enter a serial number

How will this be used?

We require the serial number to identify exactly which product you have purchased to efficiently and effectively assist with your product query.

Software Version *

Please enter the software version

How will this be used?

We require the software version to identify which version your product is operating on to efficiently and effectively assist with your product query.

Date Purchased *

Please enter date of purchase

How will this be used?

We require the date of purchase to verify whether or not your product is under warranty.

Add Address Details

Your address is only required if you are submitting an RMA and need the product sent back to you.

Address 1

Address 2

City

State / Region

Postcode / ZIP

Country

Please select a country

Your address is only required if you are submitting an RMA and need the product sent back to you.

Message

Please fill out a message

How will this be used?

We require a description of your question or issue to help you with your product enquiry.

Please fill out the verification

View our privacy policy